Black & Decker BK60B, Original Instructions Manual

Page: 5 / 24

(Original Instructions)
English
5
Athlete mode
People of 15 – 50 years of age who train
intensively for more than 12 hours a week and
who have a resting heart rate approximately 60
beats per minute or less, have these
measurements performed more accurately in
athlete mode.

Select between athlete mode and normal
mode by pressing up or down button (2).

Store the data by pressing the set button (3).
Setting the age
The screen will show the data in years of age.

Select the age by pressing up or down button
(2).

Store the data by pressing the set button (3).
Setting the height
The screen will show the data in centimeters.

Select the height by pressing up or down
button (2).

Store the data by pressing the set button (3).
Selecting the measuring system
The appliance can show the results in both metric
and the imperial system.

Turn the appliance over.

Select the required measuring system by
sliding the switch into the desired position.
Note!

The appliance display will show “ 0.0 “ if
there is no button press within 5 seconds
whilst setting personal data.

If the measuring system is set to kg then
the height will display in centimeters.

If the measuring system is set to lb or st
then the height will display in Inches.
Switching on and off
Switching on

Press the on/off button (1). “ 8888 “ will
appear in the display (4) followed by “ 0.0 “.
Switching off

After approximately 15 seconds of inactivity the
screen will go blank.
Measuring weight only

Switch the appliance on.

“ 8888 “ will appear in the display (4).

Step on to the appliance when “ 0.0 “ appears
in the display. (The appliance will turn off
automatically if you do not step on to it within
10 seconds)

The weight will appear on the screen for
approximately 3 seconds.
Measuring weight body fat and water
percentage
These measurements are an indication of your
level of fitness and your physical health. Consult
your physician or a qualified dietitian for
appropriate advise regarding further action.
The measurements are performed using the
technique of B.I.A. (Bioelectrical impedance
analysis), a highly reliable method for analyzing
the composition of the human body. B.I.A.
measures the resistance to the flow of a small,
harmless low-level electrical current using the
built in electrodes. Personal data like gender,
height and age, for the key factors of the analysis
results processed by the software program.
When using this appliance, we recommend that
you take regular measurements, always around
the same time of day and under the same
conditions.