Black & Decker BHT518 User Manual Download Page 8

 In case of skin or eye contact, follow 

the instructions below.

The battery fluid, a 25-30% solution of
potassium hydroxide, can be harmful. In
case of skin contact, immediately rinse
with water. Neutralise with a mild acid 
such as lemon juice or vinegar. In case 
of eye contact, rinse abundantly with 
clean water for at least 10 minutes.
Consult a physician.

Fire hazard! Avoid short-circuiting the
contacts of a detached battery (e.g. 
when storing the battery in a toolbox).

Do not incinerate the battery.

Do not attempt to charge damaged
batteries.

Chargers

Use your Black & Decker charger only to charge

batteries of the type supplied with your tool. 
Other batteries could burst, causing personal 
injury and damage.

Never attempt to charge non-rechargeable

batteries.

Have defective cords replaced immediately.
Do not expose to water.
Do not open the charger.
Do not probe the charger.

  Intended for indoor use only.

Additional safety instructions for hedgetrimmers

Wear safety goggles when operating 
this tool.

Wear gloves when operating this tool.

Do not expose the tool to rain or high
humidity.

Do not carry the tool with your hands on the

front handle switch or the trigger switch unless 
the battery has been removed.

If you have not used a hedgetrimmer before,

preferably seek practical instruction by an 
experienced user in addition to studying this 
manual.

Never touch the blades while the tool is running.
Never attempt to force the blades to come to a

standstill.

Do not put the tool down until the blades have

come to a complete standstill.

Regularly check the blades for damage and 

wear. Do not use the tool when the blades are 
damaged.

Take care to avoid hard objects (e.g. metal wire, 

railings) when trimming. Should you 
accidentally hit any such object, immediately 
switch the tool off and check for any damage.

Should the tool start to vibrate abnormally,

immediately switch it off and check for any 
damage.

If the tool stalls, immediately switch it off.

Remove the battery before attempting to 
remove any obstructions.

After use, place the blade sheath supplied

over the blades. Store the tool, making sure 
that the blade is not exposed.

Always ensure that all guards are fitted when

using the tool. Never attempt to use an 
incomplete tool or a tool with unauthorised 
modifications.

Never allow children to use the tool.
Be aware of falling debris when cutting the

higher sides of a hedge.

While operating the machine always be sure of

a safe and secure operating position especially
when using steps or a ladder.

Additional safety instructions for Australia and

New Zealand

This appliance is not intended for use by

young or infirm persons without supervision.
Children must be supervised to ensure they do
not play with the appliance.

8

Summary of Contents for BHT518













Reviews: