Black & Decker BHDS156, Instruction Manual, Page: 8 / 40

Page 8
OFF
LO
HI
WHD101W CONTROL PANEL SILKSCREEN
SIZE: 96.9 X 42.1
PANTONE 433C
SET UP & USE
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug the unit directly into a 120 V AC
electrical outlet.
NOTE:
Only operate heater in upright position.
1. Turn the thermostat knob clockwise (right) direction until it reaches the maximum
setting.
2. Turn the heat control knob clockwise (right) from the OFF position to the
FAN ONLY
( )
, LOW
(
LO
) (750 watts) or
HIGH
(
HI
) (1500 watts).
The power indicator light turns on when either the, FAN, LOW or HIGH setting is
selected.
When the desired temperature/comfort level is reached, lower the thermostat knob
until the heater stops operating. The thermostat will automatically maintain the
desired temperature level by cycling the heater on and off.
NOTE:
Turning the TEMPERATURE control knob clockwise will increase the
temperature setting.
Turn the fan/heat control knob to “OFF” to shut off the unit.
Temperature control knob Power selection knob
FAN
1500
WATTS
750 WATTS