background image

13

ENGLISH

(Original instructions)

Troubleshooting

If your appliance seems not to operate properly, follow the 

instructions below. If this does not solve the problem, please 

contact your local BLACK+DECKER repair agent.

Warning!

 Before proceeding, release the bail bar to turn 

mower off and wait for the blade to stop.

Problem

Possible cause

Possible solution

Machine fails to 

operate.

Power turned off.

Turn power on.

Fuse faulty/blown.

Replace fuse.

Grass too long.

Increase the height of 

cut and move machine to shorter 

grass to start.

Thermal cut out 

activated.

Allow motor to cool and increase 

height of cut.

Machine functions 

intermittently.

Thermal cut out 

activated.

Allow motor to cool and increase 

height of cut.

Machine leaves 

ragged finish or 

motor labours.

Height of cut too low. Increase height of cut.
Cutting blade blunt.

Replace the blade.

Underside of 

machine clogged.

Check underneath the machine 

and clear out as necessary 

(always wear heavy duty gloves)

Blade fitted upside 

down.

Refit blade correctly.

Protecting the environment

Z

Separate collection. Products and batteries 

marked with this symbol must not be disposed of  

with normal household waste.

Products and batteries contain materials that can be 

recovered or recycled, reducing demand for raw materials. 

Please recycle electrical products and batteries according to 

local provisions. Further information is available at  

www.2helpU.com

Technical data

BEMW351 (Type 1)

Voltage

V

AC

230

Power inpurt

W

1000

No-Load speed

min

-1

3500

Height adjustment

mm

23 - 63

Blade length

mm

320

Weight

Kg

7.8

Hand/arm weighted vibration value:

= <2.5 m/s

2

 , uncertainty (K) = 1.5

 

m/s

2

.

Sound pressure level at the operator's ear: 

L

PA

: 78.5

 

dB(A); K= 1.6

 

dB(A)

Sound power level L

WA

: 91

 

B(A); K= 1.6

 

dB(A)

EC declaration of conformity

MACHINERY DIRECTIVE

OUTDOOR NOISE DIRECTIVE

%

BEMW351 lawn mower

Black & Decker declares that these products described under 

"technical data" are in compliance with:

EN 60335-1:2012 + A11:2014, EN 60335-2-77:2010

2000/14/EC, Lawn Mower, L < 50cm, Annex VI,

DEKRA Certification B.V. Meander 1051 / P.O. Box 5185

6825 MJ ARNHEM / 6802 ED ARNHEM, Netherlands

Notified Body ID No.: 0344

Level of accoustic power according to 

2000/14/EC (Article 12, Annex III, L< 50cm):

measured sound power level L

WA

: 91

 

dB(A); K= 1.6

 

dB(A).

guaranteed sound power level  L

WA

: 93

 

dB(A).

These products also comply with directive 

2006/42/EC, 2014/30/EU, 2011/65/EU. 

For more information, please contact Black & Decker at the 

following address or refer to the back of the manual.

The undersigned is responsible for compilation of the technical 

file and makes this declaration on behalf of Black & Decker.

R. Laverick

Director of Engineering

Black & Decker Europe, 210 Bath Road, Slough,

Berkshire, SL1 3YD

United Kingdom

11/09/2018

Guarantee

Black & Decker is confident of the quality of its products 

and offers consumers a 24 month guarantee from the date 

of purchase.  This guarantee is in addition to and in no way 

prejudices your statutory rights. The guarantee is valid within 

the territories of the Member States of the European Union 

and the European Free Trade Area.

 

To claim on the guarantee, the claim must be in accordance 

with Black & Decker Terms and Conditions and you will need 

to submit proof of purchase to the seller or an authorised 

repair agent.  Terms and conditions of the Black & Decker 2 

year guarantee and the location of your nearest authorised 

repair agent can be obtained on the Internet at www.2helpU.

Summary of Contents for BEMW351

















Reviews: