ENGlIsH
25
TECHNICAL DATA
HEDGE TRIMMER
BEHT201
BEHTs401
TYPE
AR
B2C
B3
B2
BR
Input
voltage
V
220 220 120 220 127
Frequency
Hz
50
50
60
60
60
Power
W
420
500
Blade strokes
(no load)
.../min
(rpm)
1960
1835
Blade length
in (cm)
18 (45)
22 (55)
Blade gap
in (cm)
5/8 (16)
3/4 (19)
Blade brake
time
seg
< 1,0
Weight (not
including
electric cable)
lbs (kg)
4,21 (1,91)
5,6 (2,54)
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
Slow running, noisy or hot
blades.
• Dry, corroded blades.
• Lubricate blades.
• Blades or blade support bent.
• Straighten blade or blade support.
• Bent or damaged teeth.
• Straighten teeth.
• Loose blade bolts.
• Tighten blade bolts.
Unit will not start.
• Lock off not fully operated.
• Check that lock off is fully forward prior to
moving main trigger.
• Cable not plugged in.
• Plug cable into a working outlet.
• Circuit fuse is blown.
• Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center
or authorized servicer.)
• Circuit breaker is tripped.
• Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to trip,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center
or authorized servicer.)
• Cable or switch is damaged.
• Have cable or switch replaced at
BLACK+DECKER Service Center or
Authorized Servicer.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. For more
information about our authorized service centers and if you need technical advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location nearest you, or visit us at
www.blackanddecker-la.com
