Page 8
BEFORE FIRST OPERATION
1. Grip each side of the bucket and pull to remove the bucket from the
dehumidifier (Fig. 4).
2. Check inside the bucket to make sure the float system is in the correct
position. If not, place the float in the correct position (Fig. 5).
3. Re-insert the bucket once you have determined the float system is in the
correct position (Fig. 6)
The float in the bucket is essential to the “bucket full” system working properly.
Do not remove the float and make sure the float can rotate freely.
SET UP & USE
Fig. 4
Fig. 5
Fig. 6
Summary of Contents for BDT30WTA
Page 19: ...Page 19 ...
