4
ENGLISH
(Original instructions)
5
ENGLISH
(Original instructions)
Problem
Possible Solution
Possible Cause
Unit will not power on
Circuit fuse is blown
Replace circuit fuse (if
the product repeatedly
causes the circuit fuse
to blow, discontinue
use immediately and
have it serviced at a
BLACK+DECKER
service centre or
authorised servicer)
Circuit breaker is tripped
Reset circuit breaker (if
the product repeatedly
causes the circuit breaker
to trip, discontinue use
immediately and have it
serviced at a
BLACK+DECKER service
centre or authorised
servicer)
Battery is not charged
Charge battery
Battery is not fully
connected
Push battery fully into the
battery port and ensure it
is properly connected
Battery does not have
enough power
Charge battery
Battery has been removed
Replace battery
Bluetooth®
disconnected
Device roamed out of
range
Bring device into range of
radio
Device may need to be
paired to the radio again,
see "Using Bluetooth
Wireless Technology"
If two or more devices are
paired to speaker,
disconnect the speaker
in the settings of the one
of the devices.
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory opera-
tion depends upon proper tool/appliance care and regular
cleaning.
Warning!
Switch off and unplug the appliance before carrying
out any cleaning.
u
Dirt and grease may be removed from the exterior of the
appliance using a cloth.
Warning!
NEVER use solvents or other harsh chemicals
for cleaning the non-metallic parts of the appliance. These
chemicals may weaken the materials used in these parts. Use
a cloth dampened only with water and mild soap. Never let
any liquid get inside the unit; never immerse any part of the
unit into a liquid.
Warning!
NEVER spray or in any other way apply lubricants
or cleaning solvents inside the tool. This can seriously affect
the life and performance of the tool.
Service Notes
This product is not user serviceable. There are no user
serviceable parts inside the radio. Servicing at an authorized
service center is required to avoid damage to static sensitive
internal components.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and re-
cycling of BLACK+DECKER products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER office at the
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
At the end of their useful life, discard batteries with
due care for our environment:
u
Run the battery down completely, then remove it from the
tool.
u
NiCd, NiMH and Li-Ion batteries are recyclable. Place
the battery(s) in a suitable packaging to ensure that the
terminals cannot be short-circuited. Take them to any
authorised repair agent or a local recycling station.
u
Do not short-circuit the battery terminals.
u
Do not dispose of the battery(s) in a fire as this may result
in a risk of personal injury or an explosion.