background image

4

and work with approved safety equipment, 

such as those dust masks that are specially 

designed to filter out microscopic particles.

• 

Avoid prolonged contact with dust 

from power sanding, sawing, grinding, 

drilling, and other construction 

activities. Wear protective clothing 

and wash exposed areas with soap 

and water.

 Allowing dust to get into 

your mouth, eyes, or lay on the skin may 

promote absorption of harmful chemicals.

WARNING: 

Use of this tool can 

generate and/or disperse dust, which 

may cause serious and permanent 

respiratory or other injury

. Always use 

NIOSH/OSHA approved respiratory 

protection appropriate for the dust exposure. 

Direct particles     away from face and body.

• 

Wear appropriate hearing protection 

during use. 

Under some conditions and 

duration of use, noise from this product 

may contribute to hearing loss.

WARNING:

 

ALWAYS use safety 

glasses.  Everyday eye glasses are 

NOT safety glasses.  Also use face or 

dust mask if cutting operation is dusty. 

  ALWAYS WEAR CERTIFIED SAFETY 

EQUIPMENT:

 

• 

ANSI Z87.1 eye protection (CAN/

CPA Z94.3), 

• 

ANSI S12.6 (S3.19) hearing 

protection, 

• 

NOSH/OSHA respiratory protection.

SYMBOLS

The label on your tool may include the 

following symbols. The symbols and their 

definitions are as follows:

V ..................volts 

A ..................amperes

Hz ................hertz 

W .................watts

min ..............minutes

mm ..............millimeters

or AC ......alternating current

or DC ...direct current 

no ................no load speed

 ................Class I Construction                  

                   (grounded)

 ................earthing terminal

 ................safety alert symbol

 ................Class II Construction                  

                   (double insulated)

.../min or rpm...revolutions or 

                     reciprocation per minute

FUNCTIONAL DESCRIPTION

1. Variable speed switch

2. Forward/reverse button

3. Torque adjustment collar

4. Keyless chuck

5. LED work light

6. Battery

7. Battery release button

8. Screwdriver bit holder

1

2

4

7

8

6

5

3

BLACK+DECKER Battery and Charger Systems

Chargers/Charge Time** (Hours) (0% to 100% charge)

20V MAX* 

Batteries

Watt 

Hours

20V MAX* Chargers

LCS200 LCS1620 LCS201 L2AFC L2AFCBST BDCAC202B

LBX20

26

6.5

3.25

1.3

0.65

0.65

0.65

LBXR20

30

7.5

3.75

1.5

0.75

0.75

0.75

LBXR20BT

30

7.5

3.75

1.5

0.75

0.75

0.75

LBXR2020

40

10

5

2

1

1

1

LBXR2520

50

12.5

6.25

2.5

1.25

1.25

1.25

LB2X3020

60

15

7.5

3

1.5

1.5

1.5

LB2X4020

80

20

10

4

2

2

2

**All charge times are approximate. Actual charge time may vary.

Summary of Contents for BDCDD120C











Reviews: