4
GENERAL SAFETY RULES
WARNING:
READ ALL INSTRUCTIONS BEFORE OPERATING PRODUCT. FAILURE TO FOLLOW ALL
INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND OR SERIOUS INJURY.
IMPORTANT SAFETY INSTRUCTIONS
1.
FOR YOUR OWN SAFETY, READ THE INSTRUCTION
MANUAL BEFORE OPERATING THE MACHINE.
Learning the machine’s application, limitations, and
specific hazards will greatly minimize the possibility of
accidents and injury.
2.
WEAR EYE AND HEARING PROTECTION.
ALWAYS USE SAFETY GLASSES.
Everyday
eyeglasses are NOT safety glasses. USE
CERTIFIED SAFETY EQUIPMENT. Eye protection
equipment should comply with ANSI Z87.1
standards. Hearing equipment should comply with
ANSI S3.19 standards.
3.
WEAR PROPER APPAREL.
Do not wear loose
clothing, gloves, neckties, rings, bracelets, or other
jewelry which may get caught in moving parts. Nonslip
footwear is recommended. Wear protective hair
covering to contain long hair.
4.
DO NOT USE THE MACHINE IN A DANGEROUS
ENVIRONMENT.
The use of power tools in damp or
wet locations or in rain can cause shock or
electrocution. Keep your work area well-lit to prevent
tripping or placing arms, hands, and fingers in danger.
5.
MAINTAIN ALL TOOLS AND MACHINES IN PEAK
CONDITION.
Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating and changing
accessories. Poorly maintained tools and machines can
further damage the tool or machine and/or cause injury.
6.
CHECK FOR DAMAGED PARTS.
Before using the
machine, check for any damaged parts. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, and any other conditions that may
affect its operation. A guard or any other part that is
damaged
should be properly repaired or replaced.
Damaged parts can cause further damage to the
machine and/or injury.
7.
KEEP THE WORK AREA CLEAN.
Cluttered areas and
benches invite accidents.
8.
KEEP CHILDREN AND VISITORS AWAY.
Your shop is a
potentially dangerous environment. Children and visitors can
be injured.
9.
REDUCE THE RISK OF UNINTENTIONAL STARTING.
Make sure that the switch is in the “OFF” position
before plugging in the power cord. In the event of a
power failure, move the switch to the “OFF” position.
An accidental start-up can cause injury.
10.
USE THE GUARDS.
Check to see that all guards
are in place, secured, and working correctly to
reduce the risk of injury.
11.
REMOVE ADJUSTING KEYS AND WRENCHES
BEFORE STARTING THE MACHINE.
Tools, scrap
pieces, and other debris can be thrown at high speed,
causing injury.
12.
USE THE RIGHT MACHINE.
Don’t force a machine or
an attachment to do a job for which it was not designed.
Damage to the machine and/or injury may result.
13.
USE RECOMMENDED ACCESSORIES.
The use of
accessories and attachments not recommended may
cause damage to the machine or injury to the user.
14.
USE THE PROPER EXTENSION CORD.
Make sure
your extension cord is in good condition. When using
an extension cord, be sure to use one heavy enough
to carry the current your product will draw. An
undersized cord will cause a drop in line voltage,
resulting in loss of power and overheating. See the
Extension Cord Chart for the correct size depending
on the cord length and nameplate ampere rating. If in
doubt, use the next heavier gauge. The smaller the
gauge number, the heavier the cord.
15.
SECURE THE WORKPIECE.
Use clamps or a vise to
hold the workpiece when practical. Loss of control of a
workpiece can cause injury.
16.
FEED THE WORKPIECE AGAINST THE DIRECTION OF
THE ROTATION OF THE BLADE, CUTTER, OR
ABRASIVE SURFACE.
Feeding it from the other
direction will cause the workpiece to be thrown out at
high speed.
17.
DON’T FORCE THE WORKPIECE ON THE MACHINE.
Damage to the machine and/or injury may result.
18.
DON’T OVERREACH.
Loss of balance can make you
fall into a working machine, causing injury.
19.
NEVER STAND ON THE MACHINE.
Injury could occur if the
tool tips, or if you accidentally contact the cutting tool.
20.
NEVER LEAVE THE MACHINE RUNNING UNATTENDED.
TURN THE POWER OFF.
Don’t leave the machine until it
comes to a complete stop. A child or visitor could be injured.
21.
TURN THE MACHINE “OFF”, AND DISCONNECT THE
MACHINE FROM THE POWER SOURCE
before
installing or removing accessories, before adjusting or
changing set-ups, or when making repairs. An
accidental start-up can cause injury.
22.
MAKE YOUR WORKSHOP CHILDPROOF WITH
PADLOCKS, MASTER SWITCHES, OR BY
REMOVING STARTER KEYS.
The accidental start-up
of a machine by a child or visitor could cause injury.
23
. STAY ALERT, WATCH WHAT YOU ARE DOING, AND
USE COMMON SENSE. DO NOT USE THE
MACHINE WHEN YOU ARE TIRED OR UNDER THE
INFLUENCE OF DRUGS, ALCOHOL, OR MEDICATION.
A
moment of inattention while operating power tools may
result in injury.
24.
WARNING:
USE OF THIS TOOL CAN
GENERATE AND DISBURSE DUST OR OTHER
AIRBORNE PARTICLES, INCLUDING WOOD DUST,
CRYSTALLINE SILICA DUST AND ASBESTOS
DUST.
Direct particles away from face and body.
Always operate tool in well ventilated area and provide
for proper dust removal. Use dust collection system
wherever possible. Exposure to the dust may cause
serious and permanent respiratory or other injury,
including silicosis (a serious lung disease), cancer, and
death. Avoid breathing the dust, and avoid prolonged
contact with dust. Allowing dust to get into your mouth
or eyes, or lay on your skin may promote absorption of
harmful material. Always use properly fitting
NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure, and wash exposed
areas with soap and water.
