4
Operating Instructions
- POWER
The POWER button supplies power to all the functions of the heater. Pressing the POWER button the heat
setting lights will illuminate.
▲
▼-
SETTING TEMPERATURE
Allow the product to operate until the ambient room temperature reaches the desired comfort level.
To adjust the thermostat, press
▲
button to increase the temperature and press
▼
to decrease the temperature.
Use this function to help regulate the ambient temperature level.
NOTE:
After the heater function or power is shutoff the blower will continue to run for several minutes to cool the
internal components.
SAVE THESE INSTRUCTIONS
IMPORTANT INSTURCTIONS
23. See directions in Figure 1. This heater is for use on 120 volts. The cord has a plug as shown in figure 1. See Figure 1
for grounding instruction. An adapter as shown at C is available for connecting three-blade grounding type plugs to
two-slot receptacles. The green grounding plug extending from the adapter must be connected to a permanent
ground such as a properly gounnded outlet box. The adapter should not be used if a three-slot grounded receptacle
is available.
B
A
C D
Grounding Pin
Cover Of Grounded
Outlet Box
Metal
Screws
Adapter
Grounding
Means
Grounding
Pin
Fig.1
