BKI DR-34, Service Manual

Page: 9 / 40

Double Revolving Oven Installation
7
Installation
Serious injury, equipment damage or death could result if attempting to install this
oven yourself. Ensure that an authorized BKI service agent install the oven.
Unpacking and Handling
It is the owners’ responsibility to file all freight claims with the delivering truck line. Inspect all cartons and
crates for damage as soon as they arrive. If damage to cartons or crates is found, or if a shortage is
found, note this on the bill of lading (all copies) prior to signing.
If damage is found when the equipment is opened, immediately call the delivering truck line and follow up
the call with a written report indicating concealed damage to your shipment. Ask for an immediate
inspection of your concealed damage item. Packaging material
MUST be retained to show the inspector
from the truck line.
Remove all packing from the interior and exterior of the oven.
Location and Clearance
Place the oven no less than 10.5" (26.7 cm.) to combustible surfaces at the rear of the machine, and 1"
(2.54 cm.) on the sides.
Wiring
Electrocution, equipment failure or property damage could result if an unlicensed
electrician performs the electrical installation. Ensure that a licensed electrician
perform the electrical installation in accordance with local codes, or in the absence
of local codes, with the National Electrical Code, ANSI NFPA 70-20XX.
This unit, when installed by an authorized BKI service agent, must be wired for use in accordance with all
applicable local, state, and federal codes. For specific electrical requirements and connections refer to the
wiring diagram attached to the unit or provided in the Service Manual.