Touch Control Combi Oven
Cleaning
20
6.0 Cleaning
6.1 Wash Program
The wash programs are accessed through the SERVICE menu, accessible from
the Main menu. Selection of the pre-chosen function is made by turning the
Master Knob then pressing it for confirmation or touching the desired selection on
the screen. The Washing function enables manual washing of the cooking
compartment. The manual washing cycle is made of 4 phases:
•
In the first phase, of the duration of 5 minutes, steam is generated in the
compartment to dampen the surfaces;
•
Upon the acoustic signal warning completion of the first phase, open the
oven door and spray the compartment doors with a detergent for ovens.
DO NOT USE CHLORINE BASED PRODUCTS;
•
Close the oven door. A new steam cycle is starting;
•
Upon acoustic signal, open the oven door and sufficiently rinse using
appropriate spray head.
In ovens equipped with Automatic washing function, the above described phases
happen automatically. With this type of ovens, to perform washing, ensure the
cleaning detergent and rinse aid are connected to the pump and select Cleaning.
The 4 automatic washing levels (Hard, Intense, Normal, Soft) are selected based
on the degree of cleaning necessary to remove cooking residue in the
compartment (Hard=deep cleaning, for very resistant filth, Soft=light washing).