bk3500 User Guide
(16-01410-EN-04)
Warnings and Cautions Displayed on the System
61
The volume name is not valid. It contains only
illegal character(s). Please enter the new
volume name.
The volume name is too long. The name must
be no longer than %d characters.
The width and height must be numbers
between %d and %d.
There are no files to be burned to a CD.
There is no mail receiver (SMTP To-address)
configured.\nTechnical service must
configure this service before it can be used.
There is no USB Device connected to the
scanner.
There was a problem saving the Diagnostic
Setup %s.
Try again.
This scanner does not support CW Doppler.
(This may be because of the power supply
version.)
Try again or contact BK service technician.
Transducer "%s" cannot be used with this
scanner.
Connect a compatible transducer. See
Product Data Sheet
for more details.
Transducer "%s" cannot be used with this
scanner. A hardware upgrade may solve the
problem.
Connect a compatible transducer. See
Product Data Sheet
for more details.
Transducer ""%s"" is disabled for this scanner.
Unable to capture image.
Try again.
Unable to connect remote control.
Unable to connect to the network drive.
Check server (UNC path), username and
password.
Unable to connect to the network drive. %s
Unable to create backup of database because
of %s. If the error persists, contact a service
technician.
Unable to launch application ("%s")
Try again.
You must end the on-going exam before you
can clear the patient archive.
You must restart the scanner after you enable
or disable the OEM interface.
Your old password is not valid.
Create new password.
Caution text
Action (if necessary)
