BK Radio GPH-CMD, Service Manual

Page: 70 / 128

BK RADIO
Page 6-1
SECTION VI
ILLUSTRATED PARTS LIST
6.1 INTRODUCTION
This section helps you identify parts used in BK Radio’s GPH-CMD radios. It includes Replacement Parts
Lists for all major assemblies arranged from the Final Assembly down to an individual part level. Each
List is followed by the corresponding Assembly Drawing (if required), Schematic Diagram and Parts
Placement.
Parts itemized in the various lists meet BK Radio’s design specifications and are the recommended
replacement parts.
6.2 PARTS LIST DESCRIPTION
Replacement Parts Lists contain specific information on each part in the corresponding Assembly
Drawing and Schematic Diagram. Sub-assemblies are also listed by a part number, helping you find the
correct sub-assembly parts. Each part and Sub-assembly has a 12-digit number that is unique. Parts are
usually identified by their schematic reference number or, in the case of an assembly, their item number.
6.3 ASSEMBLY DRAWING SYMBOLS
Several symbols are used in the Assembly Drawings. One symbol helps to identify parts (or items) that
are listed in the Drawing's corresponding Parts List. Another symbol references a specific Note that is on
the Drawing. The symbols are (with examples):
32
— refers to Item 32 in the Replacement Parts Lists
ITM 32 — also refers to Item 32 in the Replacement Parts Lists
6
— refers to Drawing's Note No. 6
L1 — refers to Part L1 (also its Schematic Reference No.)
J14 — refers to Part J14 (also its Schematic Reference No.)
2REQ'D — Indicates two of the Items are required in the Assembly