GMH Plus Owner’s Manual
11
Return to Volume Adjust Mode by waiting 5 seconds, or by pressing the
[SQL]
button again.
Pressing the
[SQL]
button and holding for more than 1 second sets the
squelch to its factory preset value.
TA
Repeater Talk Around
Press the
[TA]
button to turn Repeater Talk Around on or off. When
TA is on, the radio transmits on the receive frequency of the selected
channel, bypassing or “talking around” the repeater. This function may
be used on any channel that is programmed to a frequency pair (repeater
channel).
CG
Channel Guard Disable
Press the
[CG]
button to disable or enable Channel Guard operation.
An arrow on the display points to the
[CG]
button indicating when
Channel Guard is disabled. When Channel Guard is disabled the radio
reverts to carrier squelch and all transmissions on the assigned receive
frequency will be heard. When Channel Guard is enabled, a message
is heard only when the proper Channel Guard is received. Transmit
Channel Guard generation is unaffected. The
[CG]
button may also be
used to override Busy Channel Lockout, if Busy Channel Override is
installed.
HOM Home Channel
Press the
[HOM]
button to go to the pre-programmed Home Channel.
To set a different Home Channel, select the desired channel using the
Channel Selector knob, press the
[HOM]
button, and hold it for more
than 1 second until the arrow above the
[HOM]
button appears on the
display. The new channel then becomes the Home Channel.
SPK Remote Speaker
Press the
[SPK]
button to toggle between the built-in radio speaker and
a remotely mounted speaker.
NXT Next Scan Channel
Press the
[NXT]
button to select the next consecutive channel in the
Scan List (not during scan operation).
