6 BK Radio
FEDERAL COMMUNICATIONS COMMISSION
REGULATIONS
The FCC rules require manufacturers to comply with the FCC RF
energy exposure limits for mobile 2-way radios before they can be
marketed in the U.S. When 2-way radios are used as a consequence
of employment, the FCC requires users to be fully aware of and able to
control their exposure to meet occupational requirements. Exposure
awareness can be facilitated by the use of a product label directing
users to specific user awareness information. Your BK Radio 2-way
radio has an RF exposure product label. Also, your BK Radio owner’s
and service manuals include information and operating instructions
required to control your RF exposure and to satisfy compliance
requirements.
COMPLIANCE WITH RF EXPOSURE STANDARDS
Your BK Radio 2-way radio is designed and tested to comply with a
number of national and international standards and guidelines (listed
below) for human exposure to radio frequency electromagnetic energy.
This radio complies with the IEEE and ICNIRP exposure limits for
occupational/controlled RF exposure environment at operating duty
factors of up to 50% talk-50% listen and is authorized by the FCC for
occupational use only. In terms of measuring RF energy for
compliance with the FCC exposure guidelines, your radio antenna
radiates measurable RF energy only while it is transmitting (during
talking), not when it is receiving (listening) or in Standby Mode.
Your BK Radio 2-way radio complies with the following RF energy
exposure standards and guidelines:
•
United States Federal Communications Commission, Code of
Federal Regulations; 47 CFR §§ 1.1307, 1.1310, 2.1091 and
2.1093
•
American National Standards Institute (ANSI) / Institute of
Electrical and Electronic Engineers (IEEE) C95. 1-1992
•
Institute of Electrical and Electronic Engineers (IEEE) C95.1-
1999 Edition
INDUSTRY CANADA COMPLIANCE
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme à la norme NMB-
003 Canada.
DMH Owner’s Manual 35
BUSY CHANNEL LOCKOUT WITH OVERRIDE
This mode operates in the same manner as Busy
Channel Lockout except that the user can override and
transmit by pressing the CG button to disable receive
Channel Guard (an arrow will appear over the button).
The transmitter is locked out only if the CG button is off
(no arrow above the CG button).
ALPHANUMERIC DISPLAY
The Alphanumeric Display can be programmed to
operate in Numeric Mode, displaying channel numbers
instead of labels.
Display annunciators indicate the following information:
ALPHANUMERIC
INDICATION
PR -Priority
Channel
PRG -Programming
Mode
TX -Transmit
RX -Receive
SCN
-Scan List Channel
-Flashing SCN indicates
scanning in progress, and RX
SCN indicates receiving on a
scanned channel.
ID
-Digital reception/transmission -
‘It’s Digital’
-Programming Mode
- Automatic
Numeric Identification (ANI)
CG
-User Channel Guard Active
GRP -Group
Label
-Individual Call
-Flashing phone icon indicates
missed call.
DMH Series mobile radios can be programmed with
the following features:
