BK Radio Aurora Series User Manual Download

Page: 69 / 76

Aurora User’s Manual

TROUBLE

CHECK

No display, no sound

Turn PWR/VOL control clockwise.
Charge or replace batteries.

Display OK, no sound

Turn volume control setting clockwise.

No reception (no stations

Check antenna connection.

heard)

Move to a location closer to a station.
Enter correct frequencies.

Weak or poor reception

Turn squelch control fully clockwise and
then counterclockwise until the “noise” just
disappears.
Move to a location closer to a station.

Does not scan

Turn the squelch control fully clockwise
and then counterclockwise until Scan
appears in the display.
Check to see if channels are locked out.

Keypad buttons don’t work

Disable the keypad lock — See page 41.

Radio doesn’t operate very

Charge batteries to full capacity for longer

long

service life — See page 63.

TROUBLESHOOTING GUIDE

NOTE: Please perform the simple checks indicated for improper
operation before returning the radio for service.

For future reference, please record:

Serial No.

Date Purchased

Dealer

NOTE: For in-warranty service information, contact your local dealer.

Summary of Contents for Aurora Series












































































Search results

Summary of Contents for Aurora Series

Reviews:

Related manuals for Aurora Series

Brands by name

Popular brands

BK Radio Aurora Series, User Manual

Search results

Summary of Contents for Aurora Series

Reviews:

Related manuals for Aurora Series

Brands by name

Popular brands