Insulation Tester
5
2-3. Button and indicators:
Button / Indicator
Description
Config the Tester for a polarization index or dielectric
absorption ratio test.
Press the blue button to select alternate measurement
functions.
(3) Initiate an insulation test when the rotary switch is in
INSULATION(
) position. Causes the Tester to source
(output) a high voltage and measure insulation resistance.
(4) Initiate a resistance test when the rotary switch is in the
LoΩ position.
Backlight ON/OFF
(1)To turn on Backlight:
Press Backlight button once to turn on the Backlight. And it
will automatically turn off after 30 seconds.
Press and hold Backlight button for 2 seconds and it will
sound “beep” to keep “Backlight always ON” until Auto
power off.
(2)To turn off Backlight:
Press Backlight button once to turn off Backlight when it is
under “Backlight always ON” or “Backlight ON”.
Summary of Contents for Sefram MW9092
Page 17: ...Contrôleur d isolement 13 Fig 4 ...
Page 33: ...Insulation Tester 13 Fig 4 ...
