39
Alarms
4 configurable alarm signals allow signaling from the recorder through the digital port. The alarm signals are high (5V)
when the alarm condition is detected. The main display’s alarm status section indicates the status of the alarms. The
main display alarm status is “sticky” in that when alarm triggers, the field is set to active (red). See
. The
condition may clear, and the alarm status will continue to show an alarm happened. The digital port clears the alarm
when the programmed condition is not met any longer and returns to 0V.
To configure the alarms, open the “setup” menu from the “home” screen. See
. At the bottom of the screen
are the 4 alarms. Each button opens the configuration dialog for that alarm. See
Figure 9.1
Alarms on Setup Screen
Figure 9.2
Alarm Dialog
9.1 Alarm Status
Figure 9.3
Alarm Status
