22
F(t) Plot
This mode displays the channel signals versus time, much like an oscilloscope. The time per division is called the
“Timebase” on this unit. The display is normally in a scrolling mode displaying real time data. This changes when
recording data. In that case, the display shows the full record. See
for more information about recording
data.
Item Description
1
Screen Setup,
2
Configure custom pages,
3
Freeze Screen,
4
Full Screen - change the view to
full screen, touch the screen
anywhere to exit.
5
Timebase,
6
Numerical display - display the
current signal value and control
which channel page is displayed.
7
F(t) plot
Figure 4.1
F(t) Screen
4.1 Screen Setup
Figure 4.2
Screen Setup Dialog
From this dialog, the type of plot, numerical values, math, grid scales, number of plots, and colors are set here. The
number of plots is available when in F(t) mode, and is limited to the number of signals measured. The maximum number
is 10. When in XY mode, the number of plots is replaced by the option to enable a custom grid (background image).
When a custom grid is enabled, the options of directory and file are added to the dialog as in
. Lastly, the
choice of displaying points as dots or vectors is available for the XY display mode.
