25
Reset
Note: Restoring the instrument to default values will change all current instrument settings
and parameters back to their default values.
All instrument settings can be reset back to their factory default values by doing the following:
From the
Config
menu, select
Reset
and press the
button.
1.
There are two options that can be selected by using the
keys or rotary knob,
select
NO
to exit
or
YES
to proceed
and press the
button
.
Exit
This option will exit the
Systems
menu and return to the
Power Menu….
From the
Config
menu level, select
Exit
and press the
button.
4.11
System Menu
The system menu allows configuration of each channel’s maximum voltage limit and their
output timer.
To access this menu, press
key and then press the
button. Use the
keys to
select
CH1, CH2
or
CH3
and press the
button.
Use the
keys to select
MaxVolt, OutTimer
or
Exit,
and then press the
button.
MaxVolt
This allows the user to set the maximum voltage that can be entered from the front
panel to avoid accidental damage to DUT (Device under test) connected to the power
supply. The maximum voltage can be entered using the numeric keypad, rotary knob or
the Up/Down arrow
keys.
OutTimer
This option will configure the internal output timer of the selected channel. When the
timer is enabled, the user can set the timer from 0.1 to 99999.9 seconds for each
output. This will configure the power supply to enable the output for the specified
period of time. This value can be set using the numeric keypad, rotary knob or the
Up/Down arrow
keys.
From the
Out Timer State Set
menu level, use the
keys to select
Enable
and