10
Section 2 Operation
2.1 Front Panel Controls
1.
Power / Select: Powers on unit after connecting to BUT. Also used to select Ah seting.
After activation user can select the Ah values as per BUT rating using this key.
2.
Up: This key is used to increase the Ah values.
3.
Down: With this key, the user can decrease the Ah values.
4.
Test: On pressing this key the measurement will begin.
5.
Repeat Test: This key is used to repeat previously performed test.
6.
Reverse Polarity LED: This LED glows when the battery is reverse connected.
7.
LCD : This is 16x2 line alphanumeric display. It displays various messages & results of tests
as per Ah value selected.
8.
-ve Cable: Negative connecting cable with strain relief.
9.
+ve Cable: Positive connecting cable with strain relief.
