Common Command Introduction
25
<parameter2>={a integer value between 0 and 255}
<parameter3>={a integer value between 0 and 255}
<parameter4>={a integer value between 0 and 255}
Query Format
SYST:COMM:LAN:IPAD (SYSTem:COMMunicate:LAN:IPADdress)?
Examples
Set IP address to 10.11.13.203 SYSTem:COMMunicate:LAN:IPADdress 10.11.13.203
Get IP address.
SYST:COMM:LAN:IPAD?
Return: “10.11.13.203”
2.34 Subnet Mask Command
Description
The Command can set and get system subnet mask.
Command Syntax
SYSTem:COMMunicate:LAN:SMASk <parameter1>.<parameter2>.<parameter3>.<parame-
ter4>
<parameter1>={a integer value between 0 and 255}
<parameter2>={a integer value between 0 and 255}
<parameter3>={a integer value between 0 and 255}
<parameter4>={a integer value between 0 and 255}
Query Format
SYSTem:COMMunicate:LAN:SMASk?
Examples
Set subnet mask to 255.0.0.0 SYSTem:COMMunicate:LAN:SMASk 255.0.0.0
Get subnet mask
SYSTem:COMMunicate:LAN:SMASk?
Return: “255.0.0.0”
2.35 Gateway Command
Description
The Command can set and get system Gateway.
Command Syntax
SYSTem:COMMunicate:LAN:GATeway <parameter1>.
<parameter2>.<parameter3>.<parameter4>
<parameter1>=a integer value between 0 and 223
<parameter2>=a integer value between 0 and 255
<parameter3>=a integer value between 0 and 255
<parameter4>=a integer value between 0 and 255
Query Format
SYSTem:COMMunicate:LAN:GATeway?
Examples
Set Gateway to 10.11.13.5: SYSTem:COMMunicate:LAN:GATeway 10.11.13.5
Get gateway:
SYSTem:COMMunicate:LAN:GATeway?
Return:
“10.11.13.5”
Parameter/command
2.36 Sampling Rate Command
Description
Sets or gets sampling rate. You can only use it in TrueArb mode.
Command Syntax
<channel>:SampleRATE MODE <parameter1>, VALUE, <parameter2>
<channel> =<C1, C2>
<parameter1> =< DDS, TARB>
Summary of Contents for 4060B Series
Page 1: ......
