62
Manufacturer name
Model name
Serial number (0 if not relevant)
Version number
Command
Type: Common Query
Syntax: *IDN?
Response: BK, MODEL 4040B,0,V1.1
4.8.2 Internal Operation Commands
*RST - Reset command
The Reset command performs a device reset. It
causes the device to return to the factory default power up
state.
Type: Common Command
Syntax: *RST
4.8.3 Device Trigger Commands
a) *TRG - Trigger command
This command is analogous to the IEEE 488.1 Group
Execute Trigger interface message, and has the same
effect. It is used to trigger the device to output a wave, and
is accepted only when the trigger mode is set to Trigger,
Gate or Burst, and the trigger source is set to BUS.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
