Introduction
Congratulations on your purchase of the Model 240A Remote Network Cable
Analyzer! The 240A is a small hand-held cable tester, which enables network
professionals to quickly and easily verify the integrity of Ethernet twisted pair
cables. In on step, the 240A will test twisted pair cables for open pairs, shorted pairs,
reversed pairs, crossed pairs and split pairs. Just push the TEST button, and the 240A
will automatically scan for any existing faults in your cable. The design patented
remote terminator is provided for one-person testing of installed cables. The 240A
can generate both signal and dual tones when used as a Tone Generator.
Package Contents
-
One Model 240A Main Unit
-
One Remote Terminator
- Users
Manual
- Patch
Cable
Product Profile
Features
Features
-
Tests for wiring faults of open, short, reversed, crossed and split pairs
-
Split pair fault detection at a minimum 1.97’ (0.6cm) cable length
-
Verification of shield integrity
-
Specially designed remote unit that enables one person to test installed
cables
-
Easy to read fault display and high speed testing
-
Debug mode for detailed fault identification results
-
Auto power off to decrease power consumption
-
Low battery indicator
-
Tone Generator (single and dual tone)
Specifications
- Connectors
Model 240A Master Unit – RJ45 jack
Remote Unit – RJ45 jack
- Pairs
Tested
1/2, 3/6, 4/5, 7/8 and shield
- LED
Display
5 horizontally aligned green LEDs for pairs and shield display
5 vertically aligned red LEDs for fault display
1 stand alone LED for Tone Generator active display
-
Cable Test Length Limit
Minimum: 1.97 ft. (0.6m) Maximum: Over 656 feet (200m)
- Power
240A Master Unit – 9V Alkaline Battery (not included)
Remote Unit – no battery required
-
Dimensions HxWxD (with belt clip & rubber boot)
5 x 3 x 1.6” (128 x 77 x 40mm)
-
Weight (with belt clip & rubber boot)
6.1oz (172g)
1. RJ45
jack
2. Pair 1 indicator
3. Pair 2 indicator
4. Pair 3 indicator
5. Pair 4 indicator
6. Shield
indicator
7. Short fault indicator
8. Reversed fault indicator
9. Miss wire fault indicator
10. Split pairs indicator
11. Low battery indicator
12 T
i di
2
