70
Set up Averages
When you select “Average” format, you can press the “Averages” option
button to select “4”, “16”, “32”, “64”, “128”or “256”.
Set up function interpolation
You can select Sinx interpolation or linear interpolation.
Set up Sampling Mode
Press the “Mode” option button to select “Real Time” or “Equ Time”.
Set up Sampling Rate
The sampling rate is based on the time division scaling on the screen.
Adjust the sampling rate by turning the Time/div front panel knob. The
sampling rate is shown under the “Sa Rate” display.
3.13
Display System
The display function can be setup by pressing the “DISPLAY” button.
Table 3.32 – Display System Menu 1
Option
Setting
Description
Type
Vectors
Dots
Vectors fill the space between
adjacent sample points in the
display.
There is no link between
adjacent sample points.
Persist
Off
1 sec
2 sec
5 sec
Infinite
Sets the length of time each
displayed sample point remains
displayed.
Intensity
<Intensity>
Set waveforms’ intensity.
Brightness
<Brightness>
Set grid brightness.
Next Page
Page 1/3
Press this button to enter second