BK Precision 1696B Series, User Manual

Page: 18 / 27

PC Software Control and Installation 18
Figure 7.7
Figure 7.8
• Type in a connection name, select USB from the drop down, and select the correct COMM port assigned by your PC.
Check the windows the device manager to determine the correct COMM port. In this case Windows has assigned
COM port 12. Click “Save” and the black display will light up to indicate a successful connection. See Figure 7.15
• If using RS-485, enter the three digit ID displayed on the RS-485 setting on the instrument.
– To set the RS-485 ID on the instrument press then and use the
and or numeric keypad entry to edit ID. Press to save and exit.
If everything has gone well and the power supply is connected the software should look similar to Figure 7.16 .