BK Medical bkSpecto Advanced User'S Manual Download Page 89

Page: 89 / 164

bkSpecto Advanced User Guide

(16-01642-01)

Exam Types

Real-Time Measurements

The following measurements are displayed when

Trace

is on in real time, so that they

are continually updated during imaging:

Note that it takes a few cycles before the real-time measurements are displayed.

Calculations

The calculation formulas and accuracies, along with the tables and formulas used by
the system, are in the

Technical Data (BZ2100)

Using the Brachytherapy Exam Type

The Brachytherapy Exam Type is designed for ultrasound-guided brachytherapy and
cryotherapy for prostate cancer. This Exam Type helps you measure the volume of
the prostate.

NOTE:

If you have the VariSeed or Live Image Transfer licenses activated, the image

size is locked by default for the Brachytherapy exam type.

NOTE:

Before you perform any puncture procedure, including brachytherapy, make

sure you have read the warnings in the Puncture and Brachytherapy section of the
Safety chapter in the bkSpecto User Guide.

For information about calculating PSAD see Chapter 9, “Urology Prostate Exam
Type”.

•

Summary of Contents for bkSpecto





































































































































































Search results

Summary of Contents for bkSpecto

Reviews:

Related manuals for bkSpecto

Brands by name

Popular brands

BK Medical bkSpecto, Advanced User'S Manual

Search results

Summary of Contents for bkSpecto

Reviews:

Related manuals for bkSpecto

Brands by name

Popular brands