BK Medical 8823 User Manual Download Page 6

6

 

June 2012

8823 User Guide

 (BB1740-C)

Service and Repair

Caring for the Transducer

The transducer may be damaged during use or processing, so it must be checked 
before use for cracks or irregularities in the surface. It should also be checked 
thoroughly once a month following the procedure in 

Care, Cleaning & Safety

.

Cleaning and Disinfection

To ensure the best results when using BK Medical equipment, it is important to 
maintain a strict cleaning routine.

Full details of cleaning and disinfection procedures can be found in 

Care, Cleaning 

& Safety

 that accompanies this user guide. A list of disinfectants and disinfection 

methods that the transducer can withstand are listed in the Product Data sheet.

Sterile cover is available. See the Product Data sheet for more details.

WARNING

If at any time the scanner malfunctions, or the image is severely distorted or degraded, or 
you suspect in any way that the scanner is not functioning correctly:

Remove all transducers from contact with the patient.

Turn off the scanner. Unplug the scanner from the wall and make sure it cannot be 
used until it has been checked.

Do not remove the scanner cover.

Contact your BK Medical representative or hospital technician.

WARNING

Always keep the exposure level (the acoustic output level and the exposure time) as low 
as possible.

WARNING

Service and repair of BK Medical electromedical equipment must be carried out only by 
the manufacturer or its authorized representatives. BK Medical reserves the right to 
disclaim all responsibility, including but not limited to responsibility for the operating 
safety, reliability and performance of equipment serviced or repaired by other parties. 
After service or repairs have been carried out, a qualified electrical engineer or hospital 
technician should verify the safety of all equipment.

WARNING

Users of this equipment have an obligation and responsibility to provide the highest 
degree of infection control possible to patients, co-workers and themselves. To avoid cross 
contamination, follow all infection control policies for personnel and equipment that have 
been established for your office, department, or hospital.

Summary of Contents for 8823

















Reviews: