BK Medical 20R3, User Manual

Page: 17 / 26

20R3 User Guide (16-01278-EN-07) Endorectal Imaging
17
Figure 10. How to place the tape around the water standoff cover. The tape should cover the
bottom of the grey part of the transducer.
Figure 11. Inner cover correctly taped.
6
Pull the outer cover (B in Fig. 5) over the transducer and inner cover. Make sure
that it completely covers the tape, as shown in Fig. 12.
Figure 12. Pulling the outer cover on to cover the tape completely.
7
Using a standard syringe, fill the water standoff system slowly with degassed
water (max 200 ml).
NOTE:
Make sure that the stopcock on the water tube is positioned correctly to allow
water to pass through the tube. (See Fig. 13.)
Handle
1
3
4
2
Top of outer
cover