BJcast BJ60S, User Manual, Page: 5 / 43

Important Information
II
Important safety measures
These safety instructions can maintain a long service life of BiJie meeting box and prevent fire and electric shock. Please
read carefully and pay attention to all warnings.
install

Please do not place the BiJie meeting box in the following environment:

A rickety car, shelf, or table;

Close to a water, bath or damp room;

A place with direct sunlight and close to a heating unit or thermal radiation unit;

A dusty, smoky or steamy environment;

On paper or cloth, cushion or carpet.

If you want to install the meeting box on the ceiling
：

Do not install by yourself;

Installation work must be entrusted to qualified technicians to ensure standard operation and prevent personal
injury;

The ceiling must be strong enough to withstand the weight of the BiJie meeting box (including supports) and
must be installed in accordance with local building codes;

Please consult your local dealer for details.
Notes on fire and electric shock

In order to avoid hot air accumulation inside the meeting box, make sure that the ventilation is in good condition
and the vent is not blocked. A minimum of 10 cm should be left between the meeting box and the wall.

Do not let paper and paper scraps fall into the inside of the meeting box. Do not insert metal objects such as wires or
screws into the equipment. If any object is found falling into the equipment, the power supply must be cut off
immediately, and then the qualified maintenance service personnel shall be entrusted to take out the object.

Do not place any objects on top of the meeting box.

Do not touch the power plug in thunderstorm days. This may cause electric shock or fire.

The operating power supply of the power adapter of the conference box is 100 ~ 240 V 50 / 60 Hz AC. Before using
the equipment, it is necessary to confirm whether the power supply used meets the requirements of the equipment.

Use the power cord carefully. Damaged or worn power cord may cause electric shock or fire.

Do not use the power cord not attached to the equipment;

Do not bend or pull the power cord excessively;

Do not put the power cord under the equipment or other heavy objects;

Do not cover the power cord with blanket or other soft materials;

Do not heat the power cord;

Do not touch the power plug with wet hands.