BJ-321 Adapted Wireless Personal Alarm
This product is used to give an emergency alert
through an adapted control. Just click on the
transmitter button or pressing the switch to generate
the warning through an alarm melody.
Instructions
Connect 23AE 12V battery in the transmitter (included
with the product) taking into account the polarity (see
Figure 1).
Connect three AA batteries of 1.5 V in the back
compartment of the alarm taking into account the
polarity of the three batteries. Close the battery
compartment.
To turn on the alarm activate the control button or
connect a switch to the switch input and activate it.
The LED indicates that the transmitter has been
activated will turn on during a seconds to indicate that
the call has been done.
Figure 1. Transmitter details.
If you want to change the alarm tone, press the red
button inside the control battery compartment. When
activating it the new alarm melody will sound.
Features
o
Reaches 70 meters in free space, lower in places
with obstacles.
o
16 different sounds.
o
Includes plug and screw for ring installation.
o
High sound alarm.
Maintenance and precautions
o
Clean the product with a cloth slightly
dampened with water.
o
Avoid impacts on both the control and the
ring.
o
Do not connect switches that can apply
voltage to the input switch.
Suggestions
o
See our list of switches to see which best fits
your needs.
o
Check with our technical team if you want to
match more than a one trasmitter or ring
together.
Manufactured by Electro DH, S.A.
Calling button
Command
tone button
battery
