3
Connection
Step 1:
Direct plug the connect of the HDMI IN of BCHDMIWE Transmitter to a Source device or
Notebook (Satellite receiver, CATV STB, BD player, PS4, PS3, XBox), you can use another
HDMI cable connected the HDMI OUT to the HDMI IN of BCHDMIWE.
Step 2:
Use HDMI cable to connect the HDMI OUT of BCHDMIWE receiver to a display device (HDTV,
Projector)
Step 3:
Connect the Y type model USB power cable to the Power Jack (Micro USB type) of
BCHDMIWE Transmitter.
Step 4:
Connect USB power cable to the Power Jack (Micro USB type) of BCHDMIWE Receiver.
Step 5:
Connection completed & ready to use.
If no video signal on your display, please Pairing the TX and RX first. (Press the Pairing
key of RX box and then press the Pairing key of TX Stick).
Operation
A. Installation
1.
Make sure your input AC voltage conforms to the adaptor specifications.
2.
Only use the power adaptor provided with the BCHDMIWE. If you use your own adaptor, make sure
the output connector is micro USB and power output is DC 5V /1A.
3.
If the USB port of your Source device can not support enough power current , Please connect other
AC power adaptor which is DC 5V/1A to the power connector of BCHDMIWE transmitter.
4.
With direct line-of-sight, the maximum range of A/V signal transmission can reach up to about 30
metre, and this distance would be shortened by obstacles or walls placed between transmitter and
receiver. (The optimum indoor range is less than 30 metre)
B. TX & RX PAIRING MODE
Notebook
HD Projector
HDMI out
USB Power cable
USB cable
HDMI
TX
RX