Operation
Operating instructions iS10 / iS20
36
38019417000 en
5
5.10.2
Enter target value and tolerance limits
Tolerance weighed
Display only if 50 = 1
Key
Display presentation
Process description
Tolerance weighed.
Current target value is displayed.
Change target value weighed with
or call up
next parameter with
.
Change value: Place new target weight on scale
and confirm with
.
Current upper tolerance limit is displayed.
Change upper tolerance limit with
or call up
next parameter with
.
Current lower tolerance limit is displayed.
Change lower tolerance limit with
or call up
next parameter with
.
Save setting with
or cancel with
.
Call up % ± tolerance
Display only if 50 = 2
Key
Display presentation
Process description
% ± tolerance of target value is selected.
Current % deviation from target value is dis-
played.
Change % deviation with
or call up next pa-
rameter with
.
Change value: % table is selected.
