Ver. 1.00
- 21 -
SRP-S320
2) Mounting Partition(40,58,62mm)
Position the partition on the front and back grooves and press the center part to fix it as
shown in the picture.
The position to secure the partition varies depending on the type of paper.
(Refer to the picture below.)
1. 58mm (2”) roll paper: mount 1 partition at Position #1.
2. 40mm roll paper: mount 2 partitions at Positions #1 and #2.
3. 62mm roll paper: mount 1 partition at Position #2.
※
The shape of the partition is the same for each type of roll paper.
Caution
After using narrower papers (e.g. 40, 58, 62mm width) than the
maximum paper width of 80mm, please do not use any wider ones as it
might affect printing quality due to uneven platen roller abrasion.
Position #1
Position #2
