BIXOLON SRP-770II, User Manual, Page: 16 / 25

Rev. 1.12
- 16 -
SRP-770II
[Table 1] Dip Switch 1
No Functions Details
Off 4.0 ips
1-1 Speed Selection
On 5.0 ips
4 3 2 Density
Off Off Off 13
Off Off On 14
Off On Off 15
Off On On 16
On Off Off 17
On Off On 18
On On Off 19
1-2
1-3
1-4
Density Selection
On On On 20
Off Normal Mode
1-5 Exhibition Selection
On Demo Mode
Off Label Paper
1-6 Media Selection
On Thermal Continuous Paper
Off Without Auto Cuter
1-7 Auto Cutter
On With Auto Cuter
Off Back Feeding Enable
1-8 Back Feed Option
On Back Feeding Disable
[Table 1] Dip Switch 2
No Functions Details
2 1 Baud Rate
Off Off 9,600 bps
Off On 19,200 bps
On Off 230,400 bps
2-1
2-2
Baud Rate Selection
On On 115,200 bps
Off Gap
감지
2-3 Media Detection
On Black-mark
감지
2-4 Reserved Default --- off
2-5 Reserved Default --- off
Off Receive Buffer Full
2-6 Busy Condition
On
*Offline
*Receive Buffer Full
Off Enable
2-7
Paper End Sensor
Status On Disable
Off Disable
2-8
Long Label
Split Printing
On Enable
5-2 Pause/Restart
Press FEED button to pause at the middle of labels printing.
1) Press FEED once.
2) Printer stops after on-going printing and Red LED becomes on.
3) Press FEED once again. It restarts printing in a queue.