Rev. 2.03
- 42 -
SMP6350
6-1-2 Recommended Screws
- JIS B1111 M2.6 Cross Fluted Pan Head Machine Screw
6-1-3 Precautions during mounting the printer body
- Care must be taken not to make excessive impact, deformation, or twist while mounting
the printer. Otherwise, it might cause degradation of printing quality, paper tilting, paper
jam, or printing noise.
- Mount the printer on a flat surface and set the printer so that it does not move.
- Care must be taken to avoid damage in FPC such as folding or denting while mounting
the printer main body.
6-2 Possible Mounting Angle of the Printer Mechanism
The printer mechanism can be mounted within a 120
°
range as shown in the following
picture. Check performance by actually mounting the device. Be sure to check the
recommended paper layout in Section 9.
Fig 6-4 Possible Mounting Angle of the Mechanism
Summary of Contents for SMP6350
