BIXOLON BK3-21, User Manual

Page: 15 / 34

Ver. 1.00 - 15 -
BK3-21
* Table 9 – Print width selection
Print width 7-2 7-1 Default
54mm (432dot) OFF OFF
54mm 48mm (384dot) OFF ON
12mm (96dot) ON OFF
8) MSW 8
Switch Function ON OFF Default
1 Data length 7 bit 8 bit OFF
2 Parity check YES NO OFF
3 Parity selection EVEN ODD OFF
4 Data receive error Ignore Print “?” OFF
5
Baud rate selection * Refer to following Table 10
OFF
6 OFF
7 OFF
8
Serial interface
selection
Memory Switch DIP Switch OFF
* The memory switch setting for 8-5 to 7 (Baud rate selection) applies only when memory
switch 8-8 is ON.
* The setting for DIP switch is not considered when memory switch 8-8 is ON.
* Table 10 - Baud rate selection
Baud rate 8-7 8-6 8-5 Default
115,200bps OFF OFF OFF
115,200bps
57,600bps OFF OFF ON
38,400bps OFF ON OFF
19,200bps OFF ON ON
9,600bps ON OFF OFF
4,800bps ON OFF ON
2,400bps ON ON OFF
115,200bps ON ON ON
9) MSW 9
Switch Function ON OFF Default
1
Serial communication
flow control
* Refer to following Table 11
OFF
2 OFF
3~8
- - -
OFF
* Table 11 - Serial communication flow control
Serial communication flow control 9-2 9-1 Default
Hardware(DTR/DSR) OFF OFF
Hardware
(DTR/DSR)
Software(XON/XOFF) OFF ON
None ON OFF
Hardware(DTR/DSR) ON ON