BIXOLON BCD-2000 User Manual Download Page 25

 

Rev. 1.02 

-  25  - 

BCD-2000 

 

Warning - U.S.A 

 

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  A  digital 
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection  against  harmful  interference  when  the  equipment  is  operated  in  a  commercial 
environment. This equipment generates uses, and can radiate radio frequency energy and, if 
not  installed  and  used  in  accordance  with  the  instruction  manual,  may  cause  harmful 
interference  to  radio  communications.  Operation  of  this  equipment  in  a  residential  area  is 
likely  to  cause  harmful  interference  in  which  case  the  user  will  be  required  to  correct  the 
interference at his own expense. 
 

ii) 

Changes or modifications not expressly approved by the manufacturer could void the user's 

authority to operate the equipment. 
 
 

Notice - Canada 

 
i) Class A Digital Device : Wired Device 
This  Apparatus  complies  with  class  “A”  limits  for  radio  interference  as  specified  in  the 
Canadian department of communications radio interference regulations.   
Get  appareil  est  conforme  aux  normes  class  “A”  d’interference  radio  tel  que  specifier  par 
ministre canadien des communications dans les reglements d’interference radio. 
 
 

Caution

 

Some  semiconductor  devices  are  easily  damaged  by  static  electricity.  You  should  turn  the 
display “OFF”, before you connect or remove the cables on the rear side, in order to guard the 
display  against  the  static  electricity.  If  the  display  is  damaged  by  the  static  electricity,  you 
should turn the display “OFF”. 
 
 

Waste Electrical and Electric Equipment (WEEE) 

 
This marking shown on the product or its literature, indicates that is should not be 
disposed  with  other  household  wastes  at  the  end  of  its  working  life,  To  prevent 
possible  harm  to  the  environment  or  human  health  from  uncontrolled  waste 
disposal,  please  separate  this  from  other  types  of  wastes  and  recycle  it 
responsibly  to  promote  the  sustainable  reuse  of  material  resources.  Household 

users  should  contact  either  the  retailer  where  they  purchased  this  product,  or  their  local 
government  office,  for  details  of  where  and  how  they  can  take  this  item  for  environmentally 
safe  recycling.  Business  users  should  contact  their  supplier  and  check  the  terms  and 
conditions of the purchase contract. This product should not be mixed with other commercial 
wastes for disposal. 

 

 
 
 
 

 

Summary of Contents for BCD-2000



























Reviews: