v. 3.0
Reference guide
Compressor Control Module CM-RC-01
3.0
5 / 44
1.1
Reference guide
Before installation, the user should be thoroughly familiarized with this reference guide,
especially with purposes, installation and operation.
Special care should be taken when installing and connecting external equipment (PTC
sensor, high voltage etc.) and handling the modules correctly according to protection
against ESD (Electro Static Discharge).
Installation of the CM-RC-01 must be performed by authorized personnel only. All
warranties are excluded in case installation is performed by unauthorized personnel or
in case the CM-RC-01 has not been correctly installed.
1.2
Safety
The CM-RC-01 is a protection device and not a safety component according to the
Machinery Directive and cannot be used in “medical” or “life support” equipment
Before commissioning, the service technician shall ensure that personal safety
requirements are met in conformity with the Machinery Directive and local legislation
based on safety estimations.
Electrical plant failures are to be immediately solved, even though no immediate
danger exists; the CM-RC-01 and motor must be without power.
Before soldering or welding on the compressor, all connections on the CM-RC-01 must
be secured against overvoltage!
