Page 37 of 191
800581-2.11 NeurOne System User Manual.doc
Amplifier back panel connections:
1.
Power
–
to Main Unit or to Battery Pack, 12 V.
2.
Optical link
–
to Main Unit.
3.
Cap Inputs
–
37 pin D-connector for EEG caps.
4.
Bipolar/Module
–
25 pin D-connector for bipolar channels and external sensors.
Each Amplifier in NeurOne system has an identification label in the left upper corner of
the front panel. The first Amplifier 1 of the system is labeled
“1”, Amplifier 2 is “2” etc…
With EXG amplifier you can also use 12 V Battery Pack.
4.5 Tesla Amplifier
A single NeurOne Tesla amplifier offers 32 monopolar channels and 8 bipolar
channels, allowing up to 40 available measurement channels. For signal connection
you can use either the flat cable connectors on front panel or additional JackBox
providing 80 safety connector inputs. There are 2 versions of Teslas (Tesla being beige
and Tesla MRI being black in color).
Tesla front panel connections:
1.
Cap inputs
–
60 pin KEL-connector for EEG cap and bipolar inputs (all 40
channels).
2.
Bipolar inputs
– 26 pin KEL-connector for bipolar channels and external sensors.
