• Press ALARM ON/OFF
• Press ALARM SET button. Hour digit will flash. Press to adjust hour.
• Press the ALARM SET key again, then press to adjust minute.
• Press the ALARM SET key to finish setting.
1. Set Alarm Time:
good, better...
WWW.BITTELAMERICAS.COM | 1 (888) 9-BITTEL | [email protected]
2. Activating the Alarm
• Press ALARM ON/OFF key to start and close alarm. The alarm time and indicator will be
displayed on the LCD if the alarm is activated. The alarm and indicator will NOT be displayed
if the alarm is off.
3. Alarm snooze feature
• When alarm is audible, press any key (except for ALARM button) or pick up the handset, it
will activate the Snooze for10 minutes
• Alarm ringing during playing mode, it will exit playing mode automatically.
• Press SNOOZE to adjust the LCD brightness, there are three levels to select
from: Mid, Hi and Off.
Make sure Media5 is idle (no radio, no LINE IN, no Bluetooth)
• Press
ALARM SET
for 6 seconds until hours flash
• Change time using
• Press
ALARM SET
until minutes flash
• Change time using
• Press
ALARM SET
to complete
When idle the HOLD key can be considered as the STORE key. To program a sequence behind
the guest service buttons;
• Press HOLD
• Press the sequence to be dialed (Ex; “0” for operator)
• Press HOLD
• Press the autodial to be programmed
SETTING THE TIME
SETTING THE ALARM
ADJUSTING LCD BRIGHTNESS
GUEST SERVICE BUTTON PROGRAMMING
Summary of Contents for UNOMedia5
Page 1: ...UNOMedia5 User Guide ...