Bittel UNO Media Series, User Manual, Page: 5 / 15

_______________________________________________________________________
_BITTEL Page 5 of 15 UNO 67 68 CORDLESS
Pape
r
Holder
Port for holder
2. Insert the faceplate to the Faceplate holder
3. Install Power and Telephone cord
First please connect the T-Cable’s power jack (Marked 1 in the below figure)
with the power adaptor. Then please connect the T-Cable’s RJ11 (4 pin.
Marked 2 in the below figure) with the telephone line jack in the room. Finally
please connect the T-Cable’s RJ11 port (6 pin. Marked 3 in the below figure) to
telephone set’s “TO TEL” port, which is on the back of the phone.