_________________________________________________ NEO 62 SERIES
3.
Adjust the call volume
•
When base is in use, press VOL key to adjust the receiving volume level of speaker, total five levels.
•
When Handset is in use, press VOL or VOL +/-‐ to adjust the receiving volume of Handset, total five levels.
Note:
Press HOLD +#+HOLD+VOL+/VOL – to recover the default volume level.
Press HOLD +*+HOLD+VOL+/VOL-‐ not to recover the default volume level.
4. Using the Hold Key
Activate Hold
•
For one-‐line phone, when the base is in use, press HOLD button, the HOLD indicator will flash, IN USE/SPKR indicator
will turn off. In this case, the line will be held.
•
For two-‐line phone, when the base is in use, press HOLD button, the relevant LINE button will flash, the IN USE/SPKR
indicator will turn off. In this case, the relevant line will be held.
•
For one-‐line phone, when the handset is in use, press the HOLD button of the handset, the IN USE/SPKR indicator of
the base and the ON indicator will turn off. In this case, the line will be held.
•
For two-‐line phone, when the handset is in use, press HOLD button of the handset, the relevant LINE indicator will
flash, IN USE/SPKR indicator will turn off. In this case, the line will be held.
5. Release Hold
•
For one-‐line phone, re-‐press HOLD, and then press SPKR of the base of the ON/SPKR button of the handset, the held
line will be released.
•
For two-‐line phone, re-‐press the relevant held Line button of the base or the handset, the held line will be released.
(If both lines are held, then please press the SPKR button of the base or handset to release LINE 1)
6. SPKR, handset and Wireless Base, Handset calling changeable
•
The communication can be changed between speaker status and non-‐speaker status of the handset through the SPKR
button on the handset
•
Change the communication from base to handset: When the base is in use press HOLD button to hold the current line,
then press ON or SPKR button of the handset (for one-‐line) or press the relevant held LINE (for two-‐line), then the
communication will be changed to the handset, and the base will be released; when the base is in use, directly press
the ON or SPKR button of the handset (for one-‐line) or press the relevant held LINE button (for two-‐line), the
communication will be changed to handset. Then press SPKR (for one-‐line) or relevant LINE (for two-‐line) to end the
communication through the base.
•
Change the communication from the handset to base; when the handset is in use, press HOLD button to hold the call,
then press SPKR on the base (for one-‐line) or the relevant held line (for two-‐line), the communication will be changed
to base, the held line of the handset will be released; when the handset is in use, then press SPKR of the base (for
one-‐line) or the relevant held line (for two-‐line), the communication will be changed to handset, then please put the
handset back to the base or directly press the OFF button of the handset (for one-‐line) or the relevant held line (for
two-‐line) to end the communication of the handset.
•
Change the communication into cordless handset: Please press SPKR of the cordless handset and put back the corded
handset.
7. Three-‐way Conference (Two-‐line Model only)
Base three-‐way conference:
•
Press the accordance line key to connect the call firstly, then press HOLD key to hold the current line then connect
another line, after that press CONF key to enter into three way conference mode. Press SPKR key to finish the CONF
mode.
Handset three-‐way conference:
•
Press the accordance line key to connect the call firstly, then press HOLD key to hold the current line then connect
another line, after that press CONF key to enter into three way conference mode. Press accordance line key to finish
the CONF mode and keep the current line call, or press HOLD key to hold the two lines, and then press one line key to
continue the call.
•
Press the accordance LINE key to remove the CONF mode and enter into the accordance line key talking then press
HOLD key to hold the two lines, and then press the accordance LINE key to talk with the line and hold another LINE.
8. To redial the last number dialed
•
Base and Handset off-‐hook, press REDIAL key (for base and one-‐line, it’s REDIAL button, for two-‐line it’s CONF/R
