_______________________________________________________________________
_BITTEL
Page 7 of 13 HWDCD9888(38)TSD
3. Charging the handset
Under the first time to use this device or after a long time used, this device need
to recharge . Just put the handset on it’s position and it will charge automatically.
If the charge light on always means it’s on charge mode . If the light flashing
means the charge work finished . This device own self-protection function and
don’t worry about overcharge.
4. Adjust volume
During talking , press VOL key to adjust receiving volume .
5. Redial feature
Press redial key after off-hook will dial the last dialed number out .
After 5 minutes the last dialed number will disappear automatically.
6.Using the Hold key
Off-hook mode, p
ress [HOLD] key on base to place the caller on hold , the indicator
for the line on hold will get light. Restart the telephone will resume the hold mode. If
pick up the phone call from paralleled line , the hold device will resume automatically.
If using handset, press HOLD key to keep the line in hold mode, press ON/OFF key to
resume.
7.Using the Mute key
Off-hook mode, p
ress [MUTE] key will stop sending , press MUTE key again will
resume the sending .
8. Programming and delete memory keys manually
Under on-hook mode, pr-dial number and press [SET] key, then press a memory key to
finish.
On-hook mode, press [SET] key first , then press the accordingly memory key to
delete .
On-hook mode, press the memory key can display and dial the number out directly.
Off-hook mode, press memory keys can dial the number out directly.
9
.
View in-coming & out-going calls and delete
On-hook mode, press [UP] or [DOWN] key to view the in-coming calls , press [SET]
key then press [UP] or [DOWN] key will delete the number completely (Just
UP/DOWN-SET –UP/DOWN-SET . Press [SET] key to confirm the delete. LCD
display OK when finished.
On-hook mode, press [UP]or [DOWN] key to viewing in-coming calls ,
press[DEL] key to delete the , LCD display OK when finished.