V1
Bitspower Leviathan Slim All In One 120
Before fill in water,please make sure all the component be installed correctly,avoidingleaking happen and destroy the PC component.
Big 4PIN can connect
to use same power.
Water Outlet (connected with
another inlet of accessory)
Water Inlet (connected with
another outlet of accessory)
Procedure of filling with water:
1.Firstly, dismantle stop fitting to fill with
water to 90%.
2.Install the pipe set , and turn on AIO power
to turn around water.
3.After setting still a few minutes, bubble will
gather up to the top of tank continuously.
4.User can fill with water through pipe set
at this step.
5.After finishing of exhausting bubble, dismantle
pipe set and install the stop fitting .
3
Remark: SC6 pump is “PWM”.
If using this way to supply
power,It will use the fastest speed
tooperate. The function of PWM
can be active by the software or
hardware with controlling speed.
Disposition of main body
can be changed or upgraded by
the case space. User can use hex
wrench to dismantle the fan.
Remark:Using this set package, we sug
-
gest to fill with water first and exhaust
bubble, then to install in the case.
1
2
5
7
6
4
3
3
3
7
5
5
7
