Notice
Before filling in the water, please make sure all the components are
installed correctly. To prevent any leakage which may damage the PC
components, please perform a 24-hour leaking test with only the pump
connected to the power supply.
Bitspower reserves the right to change the product design and
interpretations. These are subject to change without notice. Product
colors and accessories are based on the actual product.
When using leak tester on water cooling loop, in order to avoid product
damage due to excessive pressure, the input pressure should not exceed
0.5kg/cm
2
(Bar). If the product is damaged due to
excessive pressure, it will be borne by the customer. Forbidden to use the
leak teser when there is water in the loop or the pump is runing.
Bitspower recommends that consumers use the Bitspower Pellucid
Coolant for their water-cooling liquid. Also, they can add Bitspower Dye
to Pellucid Coolant for the color requirement. If the consumer chooses
different water-cooling liquids, the resulting impurities may cause peeling
off the coating on some of the hardware, water channels blockage by
built-up residue, improper operation of the water pump, water tank tube
breakage, and o-rings deformation leading to leakage. Any issues related
to the use of inappropriate water-cooling liquid will be the responsibility of
the consumer.
[ 3 ]
