BITREK BI 810 TREK, User Manual

Page: 16 / 17

www.bitrek.eu
support@bitrek.eu
+380 44 507 02 07
10. Important points during equipment configuration
We ask you to read this section attentively, as the most frequent problems
appear due to mistakes during the preparatory work on the equipment, as
follows:
10.1.
Wrong connection to contacts or wires.
10.2. USB-UART wrong connection.
10.3. Antennas wrong connection.
10.4. Not removed PIN code verification on the SIM-card.
10.5. Not activated GPRS service on the SIM-card.
10.6. Sending incorrect commands via BITREK Configurator .
During trackers operation the following factors influence on its correct work:
10.7.
Incorrect or unqualified device installation.
10.8. Tracker installation on inappropriate transport.
10.9. Intentional or unintentional trackers jamming using FM-transmitters and
other similar equipment.
10.10. Installation in easily accessible location for driver.
Remember that you can get maximum effect from our equipment only if
you work correctly with it as during the preparation stage so during its
usage.