xxxx, Ver. 0.01
2-1
Section 2 .
Installing the Equipment
[Overview info]
Basic Safety
Guidelines
The following general guidelines should always be followed when installing
or doing maintenance work on any electrical or radio equipment
??
Do not locate the transceiver near overhead power lines or other electric
light or power circuits, or where it can come into contact with such
circuits.
??
Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate
electrical inspection authority or an electrician if you are uncertain that a
suitable grounding is available.
??
Do not work on the system or connect or disconnect cables during
periods of lightning activity.
??
Disconnect all power and external cables before moving a chassis.
??
Do not work alone if potentially hazardous conditions exist.
??
Always verify that power has been disconnected from a circuit; never
assume it has been.
??
Do not perform any action that creates a potential hazard to people or
makes the equipment unsafe.
??
Carefully examine your work area for possible hazards such as moist
floors, ungrounded power extension cables, and missing safety fuses.
Warning
: This equipment contains an energy hazard. Disconnect the system
before servicing.