AntMiner Manual
Last updated: 4/14/2014
Page 5 of 9
Page5 / 9
3
Pool Setting
Through ‘Status->Miner Configuration ‘, you will be able to configure your miner.
Pool URL-In this field you should enter the URL of your desired pool.
Worker- This is your worker ID on the selected pool.
Password- This is the password for your selected worker.
Comment:
2.3.1 AntMiner can setup three mining pools, the priority decreases from first pool (pool 1) to
third pool (pool 3).
The low priority pool will start to work, only when the high priority pool
encounter fault.
2.3.2 When ‘Beeper ringing’ is chosen, beeper is to alert once the miner stops mining, otherwise
beeper won’t alert, even if the Miner stops mining.
2.3.3 When ‘Stop running when temperature is over 80
℃
’ is chosen, Miner won’t mine if the
temperature is over 80
℃
’ to protect the miner. If it’s not chosen, the Miner will continue mining
even in high temperature.
Click ‘Save & Apply’ to save and restart miner.
